CALOG106-CTR

Quantity:  
Counter/Rate Indicator Calog106-CTR indicator for NPN, PNP, TTL, Namur, Tacho or Closed Contact Sensors

This simple and affordable counter/rate indicator is compatible with a range of sensors, and is ideal for indicating totalisation and monitoring rates.

  • NPN, PNP, TTL, namur, tacho or closed contact sensors
  • Signal averaging on the rate
  • Simple, intuitive interface with scrolling text prompts
  • User programmable function button
  • Factory precalibrated
  • Security PIN protected setup
  • Selectable decimal point position and rounding

General

Display 1 x 6 digit (13mm)
Display 14 segment alphanumeric LED
Display 5 buttons.
Panel mount case 48H x 96W x 120D (mm).
Panel mount case Panel cutout: 45.5 x 92.5mm
Power supply LV: 15-48Vac/10-72Vdc
Power supply HV: 85-265Vac/95-370Vdc
Sensor type NPN, PNP, TTL, namur, tacho or closed contact

Operation

Accuracy 0.00005
Excitation 24Vdc (50mA max)
Input frequency Rate: 10kHz max (100kHz in high-speed mode). Counter: 100kHz max.
Noise filtering 0.2, 2, 20kHz or Off
Pulse width Minimum pulse width must exceed 5µs
Resolution Rate: 0.01Hz (1Hz in high-speed mode)
Sampling rate Rate: 100msec. Counter: 10msec.
Temperature drift Typically 2ppm/°C

Optional

Analogue output 1 x isolated 16-bit 4-20mA or 0-10V output (Window programmable over any range within the full scale range of the controller)
Serial port Isolated RS-232 or RS-485 serial output (Modes: ASCII, Modbus/RTU slave, Ranger A. Data rates: 300-38400 baud. Parity: Odd/even/none)

This product is available in the following options.

  • HV - 85-265Vac / 95-370Vdc
  • LV - 15-48Vac / 10-72Vdc
  • A - 1 x mA/V analogue output
  • S2R - 1 x RS-232 serial port (RJ11 terminal)
  • S4S - 1 x RS-485 serial port (screw terminal)

My Cart
Item added to cart
Item copied to cart
Categories